Cấu hình thông số modbus màn hình YKHMI:
- Modbus RTU
- YKHMI ( PLC ES2, MASTER) — DTC1000 DELTA, SLAVE ( address 1 )
- Protocol: 9600 8 N 1 ( baud, data, parity, stop bit )
MODBUS RTU
H81: 9600, 8, N, 1 ( USING )
D1109: Communication protocol
M1136: Retaining communication setting
M1320: ASCII/RTU mode selection. (OFF: ASCII; ON: RTU)
D1255: PLC communication address
D1252: Set value for data receiving time-out (Unit: 1ms, min. 50ms, value smaller than 50ms will be regarded as 50ms) (only applicable for MODRW/RS instruction) In RS instruction, no time-out setting if ¡§0¡¨ is specifi
Đọc nhiệt độ DTC1000
K1: address of slave 1, DTC1000: 9600, 8 , N ( parity: none) , 1
H3: READ ( function code )
H6: WRITE ( function code, no use)
H1000: area for PV of slave , D100
H1001; SV, D101
K2: length is 2
M1318: For data receiving completed (Only applicable for MODRW and RS instruction)
M1316: For sending request (Only applicable for MODRW and RS instruction)
Nhiệt độ thực tế: PV 28.4 oC
Nhiệt độ cài đặt: 100.0 oC
Bài viết liên quan:
Delta DTCOM Auto detect DTC1000 DTC2000
